British Columbia has new combustible dust rules. WorkSafeBC's Board of Directors approved a new Combustible Dusts division in Part 6 of the Occupational Health and Safety Regulation (OHSR) on November 14, 2025, and it takes effect on January 4, 2027. The long lead time is there so employers can get ready.
The rules replace a single housekeeping line with a full framework: find out whether your dust can burn, assess the risk in writing, and run a written program to control it. This guide explains who is covered, what each step requires, and what to do now. A free toolbox talk for your crews is at the end.
Why dust is a fire and explosion hazard
Many dusts can catch fire and burn. WorkSafeBC's backgrounder explains that when fine dust particles are suspended in the air and meet an ignition source, they can ignite and spread rapidly, a process called a deflagration. In some cases this leads to an explosion. Combustible dusts come from a wide range of industries, including manufacturing, wood processing, food production and metal processing, and from activities such as cutting, grinding, crushing, sanding, polishing, mixing and handling dry materials.
Free Download: 5 Safe Work Procedures
Choose from 112 professionally written SWPs. No credit card required.
Get Free SWPsWho is covered
Under new section 6.134, the rules apply to dust at a workplace if the dust is an input, product, byproduct or waste of a work process. They do not apply to:
- a workplace where there is no reasonably foreseeable risk of injury or death to a worker from the combustion of dust; or
- dust that is in a sealed commercial package.
Under section 6.135, an employer who generates or handles dust must minimize the combustion risks, if any. That means identifying whether the dust is combustible, preparing a combustion risk assessment if it is, and, if the assessment finds a combustion hazard, preparing and implementing a combustible dust management program and training workers on the hazard.
Step 1: Identify whether the dust is combustible
Sections 6.137 to 6.139 give employers two routes. You can assume the dust is combustible, or you can determine whether it is ignitable and deflagrable. That determination is made with a qualified person and specified screening tests, using either your own test results or existing screening data published by an acceptable body or standards association.
Step 2: Write a combustion risk assessment
Section 6.140 requires a written combustion risk assessment, prepared and updated with a qualified person. It must identify each combustion hazard, the level of risk each one poses, and the work processes or other factors that could increase that risk. It must be based on factors including:
- the physical characteristics, location and amount of dust on surfaces, including whether dust could escape a conveying, vacuum cleaning or dust collection system and fuel a deflagration;
- the potential for the dust to disperse and concentrate in the air, including whether a deflagration could spread between connected machinery or equipment;
- the potential for confinement of the dust;
- the presence of competent ignition sources and of oxidants.
The assessment must be updated as soon as practicable after a significant change to buildings, machinery or equipment, or work processes.
Step 3: Run a combustible dust management program
If the assessment identifies a combustion hazard, section 6.141 requires a written combustible dust management program, prepared and updated with a qualified person. It must:
- describe how you will put the required controls in place, and any extra controls you need;
- include schedules and procedures for regular inspections of the buildings, machinery and equipment, and work processes that could create a combustion risk;
- include procedures for responding to a control failure and to an unintended combustion of dust.
You must give one person overall responsibility for coordinating the program at each workplace: the employer or an employee who knows the controls and the safe operation of the machinery and equipment. Under section 6.142, a qualified person reviews the whole program at least once a year, and reviews the relevant parts when certain events happen.
Consultation, training and records
Section 6.136 requires you to consult on the risk assessment, the program, their updates and the training. You consult with the joint health and safety committee, the worker health and safety representative, or, if there is neither, a representative sample of the workers at the workplace. Sections 6.143 to 6.145 require instruction and training for every worker exposed to a combustion risk, covering each hazard, the factors that increase the risk and the parts of the program that apply to them. Combustible dust records must be available to workers and to the joint committee or worker representative.
The controls the rules call for
For employers who need a program, WorkSafeBC's backgrounder summarizes the control sections:
- Ignition sources (6.147): remove them or, if that is not possible, control them, including friction, hot work, mobile equipment and static electricity (through grounding and bonding), and verify the controls by inspection and testing.
- Housekeeping (6.153): with a qualified person, set and document the maximum amount of dust allowed to build up on surfaces, a cleaning schedule and cleaning methods. If dust goes over the limit, remove it as soon as practicable and reduce the risk in the meantime.
- Compressed air (6.153): use it to remove dust only with a pressure regulator set at the lowest effective pressure, after removing or shutting down every competent ignition source, and with the displaced dust cleaned up before ignition sources come back.
- Capture (6.152): minimize dust escaping from equipment, and use a dust collection system where possible if enough dust is suspended in the air to create a combustion risk.
- Metal dust and bulk storage (6.151, 6.154, 6.155): stricter requirements apply.
- Fire, deflagration and restart (6.157 to 6.159): be able to suppress a fire and limit the effects of a deflagration, and have written procedures for safely resuming work after a fire or deflagration.
Two other changes come in on the same date. The old general rule in section 5.81 on removing combustible dust is repealed, because the new division covers it. Section 31.5 now requires fire departments and industrial fire brigades to have written procedures for fires and other emergency incidents involving combustible dusts.
What to do before January 4, 2027
These are our suggestions:
- List every dust. Walk the site and note where dust is an input, product, byproduct or waste, and where it builds up on beams, ledges, ducts and equipment.
- Decide how you will identify it. Either treat it as combustible or arrange screening with a qualified person.
- Book the qualified person early. The risk assessment, program and annual review all need one.
- Bring in your committee. Consultation is required, so put it on the agenda now.
- Stop using compressed air to blow down dust until the new conditions are in place.
- Train the crew. Use the toolbox talk below to start the conversation.
For the US approach under NFPA 652, see our dust explosion prevention guide.
Free combustible dust toolbox talk
A ready-to-run toolbox talk on combustible dust, based on the new BC rules: why dust burns, housekeeping, compressed air, ignition sources and what to do in a fire, with crew questions, an action page and a sign-in sheet. Fillable PDF.
Download Free: Combustible Dust Toolbox Talk
Enter your email and we'll send you the PDF immediately.
We'll also send up to 2 short follow-up emails. Unsubscribe anytime.
Keep the program and training records together
The new rules ask for written assessments, inspection schedules, training and records your committee can see. Make Safety Easy keeps inspections, toolbox talks with crew sign-off and documents in one place. Start a free trial to see how it works.
Sources: WorkSafeBC Board of Directors resolution 2025/11/14-07, Amendments to the OHSR and Prevention Manual Policy, Part 6, Combustible Dusts (November 14, 2025); WorkSafeBC, approved amendments to Part 6, Combustible Dusts, with explanatory notes; WorkSafeBC, Backgrounder: Combustible dusts regulatory changes (June 2026). In effect January 4, 2027. This article is general information, not legal advice.