Canada has added a heat and cold stress rule to its federal workplace safety regulations. SOR/2026-10 was registered on January 30, 2026 and published in the Canada Gazette, Part II on February 11, 2026. The thermal stress requirements come into force on January 30, 2027, one year after registration. From that date every federally regulated employer needs procedures for hot and cold working conditions, developed with its health and safety committee or representative.
This guide explains who the rule covers, what the procedures must contain and how to get ready before the deadline. A free template you can fill in with your committee is near the end.
Who the rule applies to
The rule sits under Part II of the Canada Labour Code, which covers federally regulated workplaces. According to the regulatory impact analysis published with the rule, these workplaces employ about 1.3 million people, roughly 8% of the Canadian workforce. They include air, rail, road and marine transportation, pipelines, banks, telecommunications and broadcasting, postal and courier services, grain elevators and feed and seed mills, uranium mining, Crown corporations, First Nations band councils, Parliament and the federal public administration.
Free Download: 5 Safe Work Procedures
Choose from 112 professionally written SWPs. No credit card required.
Get Free SWPsThe same wording was added to five federal regulations, so check which one applies to your employees:
- Canada Occupational Health and Safety Regulations (COHSR), section 10.19.3
- Aviation Occupational Health and Safety Regulations, section 5.16.3
- Maritime Occupational Health and Safety Regulations, section 255.3
- On Board Trains Occupational Health and Safety Regulations, section 7.20.3
- Oil and Gas Occupational Safety and Health Regulations, section 11.23.3
Provincially regulated employers, such as most construction companies, follow their own province's rules instead. In British Columbia that is WorkSafeBC's Occupational Health and Safety Regulation.
What "thermal stress" means
The amendment adds a definition to section 10.1 of the COHSR. Thermal stress "means all of the adverse health effects experienced by an employee as a result of their exposure to hot or cold working conditions." The rule covers both ends of the thermometer, so a single procedure has to deal with summer heat and winter cold.
What the procedures must include
Under section 10.19.3(1), the employer must develop procedures to reduce the risk of thermal stress in consultation with the policy committee or, if there is no policy committee, the work place committee or the health and safety representative. The procedures must include:
- Engineering controls, such as temporary equipment, shields, insulation and fans.
- Administrative controls, such as fluid replacement, work practices, work-rest cycles, acclimatization, physiological monitoring and the scheduling and organization of work.
- Monitoring of environmental factors, such as humidity and wind speed.
- The protective clothing and equipment to be worn or used.
- Education and training for employees on the signs and symptoms associated with thermal stress.
- Reporting of incidents associated with thermal stress in the record kept under section 10.3.
Each incident record must set out the date and time of the incident, the thermal conditions at the time, the protective measures in effect and the protective measures actually used, and the symptoms experienced by and treatment given to the people affected.
When the procedures must be used
Section 10.19.3(2) says the employer must implement the procedures when an employee is exposed to conditions that reach one of two sets of thresholds published by the American Conference of Governmental Industrial Hygienists (ACGIH) in its Threshold Limit Values (TLVs) and Biological Exposure Indices (BEIs):
- Heat: the table "Screening Criteria using WBGTeff (°C) for Acclimatized and Unacclimatized Workers" under "Heat Stress and Strain".
- Cold: the thresholds under "Cold Stress".
The reference is to the publication "as amended from time to time". The regulatory impact analysis explains that this means employers must follow the most recent version. Buy or borrow a current copy of the ACGIH booklet and record which edition your procedure uses, so you can tell when it changes.
How to get ready before January 30, 2027
The steps below are our suggestions, not wording from the regulation:
- Put it on the next committee agenda. The procedure has to be developed with your policy committee, work place committee or representative, so they need to see a draft early.
- List where people get hot or cold. Think of outdoor yards, cabs, docks, warehouses, kitchens, boiler and engine rooms, freezers and winter road work.
- Decide how you will measure. The heat thresholds use WBGT (wet bulb globe temperature), which needs a WBGT meter or a reliable source for your site. Cold work needs air temperature and wind speed.
- Write down the controls you already use. Most workplaces already provide water, shade, heated shelters or layered clothing. The procedure records them and fills the gaps.
- Add thermal stress to your incident reporting. Make sure your forms capture the four items the regulation lists.
- Train before the season. Cover the signs and symptoms of heat illness and cold injury.
Already have a heat or cold stress program? Compare it against the six required elements above and add whatever is missing. Our heat stress guide for employers and cold weather safety guide cover the day-to-day controls in more detail.
Free thermal stress procedure template
We built a fill-in template that follows section 10.19.3 item by item. It is laid out for your committee to complete and sign: triggers and who checks conditions, engineering and administrative controls, monitoring, clothing and equipment, training, the incident record and committee adoption. It does not reproduce the ACGIH tables. You get a fillable PDF and an editable Word copy.
Download Free: Thermal Stress (Heat and Cold) Procedure Template
Enter your email and we'll send you the PDF and an editable Word version right away.
We'll also send up to 2 short follow-up emails. Unsubscribe anytime.
Keep the records in one place
The rule asks for procedures, training and incident records that you can show an inspector. Make Safety Easy keeps your procedures, toolbox talks with crew sign-off and incident reports together, on any phone. Start a free trial to see how it works.
Sources: SOR/2026-10, Regulations Amending Certain Regulations Made Under the Canada Labour Code, Canada Gazette, Part II, Vol. 160, No. 3, February 11, 2026. This article is general information, not legal advice.