Asphalt Paver Operation
Asphalt paver operation with hot material burn prevention, fume control and traffic safety.
What This Procedure Covers
- Plan the paving operation
For the identified paver, screed and material-delivery arrangement. Complete equipment settings from the current manuals. Road access and traffic protection must be approved before the paving train enters the work zone.
Assign communication responsibilities: Identify who directs trucks, controls the paver, operates the screed and authorizes ground-crew approach. Agree on stop signals understood by everyone. Stop work when communication or the required separation cannot be maintained.
- Inspect and configure
Check running gear, controls, guards, hopper, conveyors, augers, screed, platforms and hydraulic leaks using the manufacturer checklist. Test required stopping and warning functions in a clear area.
Identify heating and hot-surface controls: Use the specified heating system sequence and confirm its safeguards. Gas-fired and electrically heated screeds have different controls and servicing requirements. Treat hot surfaces and material as burn hazards even after movement stops. Use designated operator platforms and walkways. Do not stand on hot plates, conveyors or other machinery surfaces that are not intended as access. Keep access routes clear of material and release agent.
- Receive material without trapping people
Brief the truck driver and paving crew on the approved delivery method. Keep people out of the space between truck and paver and clear of the hopper, body and tailgate movement areas.
Use the procedure for the actual equipment: Confirm approach, contact, braking and discharge instructions for the truck and paver combination. Do not apply a universal stop distance or blanket instruction to release truck brakes. Account for gradient, clearance and the material-transfer arrangement. Stop for unstable positioning, unexpected vehicle movement or a person entering the restricted area. Authorize restart only after the cause is resolved and the crew is clear.
- Pave and control crew access
Set speed, material feed, screed width and other operating parameters from the approved paving method. Coordinate changes with screed operators and the rolling crew.
Keep clear of moving mechanisms: Protect the hopper wings, conveyors, augers and screed-extension movement areas. Do not reach into material feed mechanisms or remove guards while operating. A blockage or adjustment requiring entry needs the authorized equipment-securing procedure before access. Use only approved release agents and cleaning products, following their SDS and equipment compatibility requirements. Do not substitute fuel or an unapproved solvent. Apply products only by the permitted method with people protected from spray and hot surfaces.
- Control exposure and respond to problems
Assess asphalt emissions using the actual material and work conditions. Check and maintain fitted fume-extraction equipment. Position people to reduce exposure while preserving safe separation from traffic and machinery.
Do not wait for irritation to assess exposure: Report symptoms promptly and have controls reassessed. Respiratory protection, where required, belongs within the applicable selection, fit-testing and training program; handing out an unspecified mask is not a complete response. Follow the site emergency plan for burns, illness, fire or a machinery incident. Keep access clear for responders and ensure the crew knows the site location and how to summon help.
- Shut down, clean and transport
Complete the manufacturer shutdown and cleaning sequence. Secure machinery before access and allow hot components to cool as required. Use the approved transport configuration, restraints and loading plan.
Reference guidance: Dynapac F121C/F141C manual (model example); NIOSH 97-105 asphalt-paver engineering controls; OSHA asphalt-fume control guidance. Complete with actual truck, paver and screed instructions and local approval.
Download the Full PDF Template
Get the complete Asphalt Paver Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.
Get This SWP + 4 More Free
Choose from 112 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsWant Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial