0
Power Tools

Jumping Jack / Rammer

Jumping jack rammer operation with trench safety and CO monitoring requirements.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Equipment and work authorization

    For upright walk-behind rammers used on approved materials. Identify the model and power source before completing this procedure. This document does not authorize excavation entry or confined-space work.

    Choose equipment that suits the location: Do not use a gasoline-powered rammer inside a building or partially enclosed area. Choose a suitable non-combustion alternative. A fan or a carbon-monoxide reading is not permission to disregard this restriction.

  2. Inspect and prepare the area

    Inspect shoe, bellows, handle, mounts, guards and power system using the manual. Confirm controls work correctly. Remove the rammer from service for cracks, leaks, loose parts or abnormal behavior.

    Keep room for the operator: Plan a clear route and stable footing with room to guide the machine without being trapped against a wall or structure. Keep bystanders out of the movement area. Do not use a generic excavation depth to decide whether entry or protective measures are required. Where separate site permits or assessments are required, confirm they are approved before starting. Stop if the work area changes or any required control is missing.

  3. Manage vibration, noise and dust

    Base the vibration assessment on reliable equipment data, actual contact time and all other vibrating tools used during the day. A fixed thirty-minute rotation is not proof of acceptable exposure.

    Reduce exposure at its source: Use suitable lower-vibration equipment, maintain isolators and plan non-vibrating tasks. Gloves may keep hands warm, but do not rely on them to control vibration. Report hand numbness, tingling or reduced function through the occupational-health process. Select hearing and respiratory protection through the applicable workplace programs. Record the actual requirements instead of treating one hearing-protector rating or an unspecified dust mask as sufficient for every task.

  4. Guide, stop and transport

    Use the designated guide handle and operator position. Keep feet clear of the shoe and follow the model startup and stopping sequence. Do not pull the operating rammer toward your feet or let it run uncontrolled.

    Distinguish handles from lifting points: Stop the machine before handling. Use the designated mechanical lifting point and rated handling equipment. A lower handhold or guide handle may not be rated for hoisting. Confirm weight, approved orientation and restraint before transport; keep people clear of a suspended rammer. Do not improvise engine servicing or open the rammer spring mechanism. Refer repair to authorized personnel using the manufacturer maintenance instructions.

  5. Close out and record

    Store securely after shutdown and inspection. Record damage and arrange repair before further use. Reassess this procedure when the equipment, material or operating location changes.

Reference guidance: Multiquip MTX80HDR operation manual (model example); NIOSH small gasoline-engine carbon-monoxide alert 96-118; HSE hand-arm vibration guidance. Complete with the actual model manual and local approval.

Download the Full PDF Template

Get the complete Jumping Jack / Rammer document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial