0
Power Tools

Bench Grinder Operation

Bench grinder operation with wheel inspection, tool rest adjustment and ring testing.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Scope and authorization

    Complete for the actual bench or pedestal grinder and abrasive wheel. Wire brushes, polishing equipment and other attachments require their own approved instructions. Do not assume this wheel-grinding procedure covers them.

    Use the correct configuration: Verify the wheel is intended for the machine, material and operation. Its speed rating must cover the machine speed. Do not substitute an oversized or unsuitable wheel, modify a mounting hole, or assume that every wheel permits side grinding.

  2. Inspect the machine and safeguards

    Keep the machine out of use if the wheel, guard, mounting, switch or electrical condition is unsafe. Secure the machine to its intended support and keep the work area adequately lit and clear.

    Measure the required clearances: For offhand grinders covered by OSHA 1910.215, the work-rest gap must not exceed 1/8 inch and the upper adjustable tongue gap must not exceed 1/4 inch. Confirm the requirements for this machine and jurisdiction, including any stricter manufacturer limit. Adjust only with the wheel stopped and the energy source safely controlled.

    Assess personal protection: Use appropriate eye and face protection and other PPE based on sparks, dust and noise. Keep hair, jewellery and loose clothing away from rotation. Do not prescribe gloves automatically: assess entanglement risk and follow the machine and task instructions.

  3. Wheel mounting and dressing controls

    Only trained, authorized people mount, replace or dress wheels using the approved instructions. Routine users report wheel defects rather than improvising maintenance.

    Inspect before mounting: Check identification, condition and storage history. Do not use damaged or suspect wheels. Perform the specified ring test where applicable; some wheel types do not produce a clear metallic ring, and a sound alone does not replace inspection. Confirm the correct flanges, blotters where required, fit and tightening method.

    Return to operation: Restore guards and correct clearances after mounting or dressing. Carry out the specified trial run with people positioned clear of the wheel’s plane. Stop for unusual vibration, noise or movement and obtain assessment. Do not use a generic trial-run duration in place of the equipment instructions.

  4. Controlled grinding and stop conditions

    Start from the safe position specified by the instructions and allow the machine to reach operating speed. Support the work on the adjusted rest and introduce it smoothly without impact or excessive force.

    Keep the work controlled: Use the approved wheel surface and keep fingers clear of the rest-to-wheel gap. Use suitable holding arrangements for small parts; do not hold a piece that cannot be controlled safely. Move the work as instructed to avoid uneven wheel wear. Manage hot workpieces without creating an entanglement or liquid-damage hazard.

    Stop for a defect: Stop for cracking, unusual vibration, loading, glazing, worn clearances or unstable work. Keep the machine out of use until the defect is resolved by an authorized person. Do not adjust a rest or guard, or attempt to clear trapped material, while the wheel is moving.

  5. Shutdown, inspection record and additions

    Let the wheel come to a complete stop before leaving the machine. Complete the approved cleanup and fire checks. Record defects and maintenance so the next user knows the machine’s status.

Reference guidance: OSHA 1910.215; CCOHS Use of Bench and Pedestal Grinders and Bench Wheel Mounting; HSE Safety in the use of abrasive wheels (HSG17). Complete against the machine and wheel instructions before approval.

Download the Full PDF Template

Get the complete Bench Grinder Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial