CPR and AED Use
CPR chest compressions, rescue breathing, AED operation and cardiac arrest recognition.
Scope and Purpose
CPR chest compressions, rescue breathing, AED operation and cardiac arrest recognition. This safe work procedure establishes the minimum safety requirements for CPR and AED Use operations. It applies to all workers, contractors and visitors who may be involved in or exposed to these activities.
Hazard Identification
- Thermal burns and heat stress
- Smoke and toxic gas inhalation
- Structural collapse during fire
- Explosion from flammable materials
- Electrical hazards during fire suppression
- Slips and falls on wet surfaces
Required PPE
Key Procedure Steps
- Review this safe work procedure and ensure all workers understand the scope and hazards before starting.
- Conduct a pre-task hazard assessment (tailboard/toolbox talk) specific to the work area and conditions.
- Inspect all required PPE and equipment. Remove any defective items from service immediately.
- Establish the work area with appropriate barricades, signage and access controls.
- Perform the task following the step-by-step instructions in the full procedure document.
- Monitor conditions continuously. Stop work if conditions change or new hazards are identified.
- Clean up the work area, properly store equipment and complete all required documentation.
This is an abbreviated overview. The full procedure with detailed sub-steps, diagrams and sign-off sheets is available in the downloadable PDF template.
Training Requirements
All workers performing CPR and AED Use activities must complete task-specific training before beginning work. Training must cover hazard recognition, PPE selection and use, emergency procedures and the steps in this SWP. Refresher training is required annually or whenever the procedure is updated. Competency must be verified by a qualified supervisor before workers are authorized to perform these tasks independently.
Regulatory References
- OSHA 29 CFR 1910.38 - Emergency Action Plans
- OSHA 29 CFR 1910.39 - Fire Prevention Plans
- NFPA 10 - Standard for Portable Fire Extinguishers
- NFPA 101 - Life Safety Code
Download the Full PDF Template
Get the complete CPR and AED Use procedure as an editable PDF. Includes detailed steps, diagrams, sign-off sheets and space for your company branding.
Get This SWP + 4 More Free
Choose from 113 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsFrequently Asked Questions
What is a safe work procedure for CPR and AED Use?
A safe work procedure (SWP) for CPR and AED Use is a documented set of steps that outlines how to perform the task safely. It identifies hazards, specifies required PPE, details the correct sequence of operations and references applicable regulations. SWPs are a critical part of any safety management system.
Who needs to follow this CPR and AED Use procedure?
All workers, contractors and visitors who are involved in or may be exposed to CPR and AED Use activities must follow this procedure. Supervisors are responsible for ensuring compliance and verifying that workers have completed the required training before starting work.
How often should the CPR and AED Use SWP be reviewed?
This SWP should be reviewed at least annually, after any incident or near-miss related to CPR and AED Use operations, when regulations change, or when new equipment or processes are introduced. All revisions must be communicated to affected workers through updated training.
Can I customize this CPR and AED Use safe work procedure for my company?
Yes. The downloadable PDF template is designed to be customized with your company name, logo and site-specific details. You should adapt the hazard list, PPE requirements and procedure steps to reflect your actual work conditions and regulatory jurisdiction.
Want Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial