0
Heavy Equipment

Excavator Operation

Safe operation of hydraulic excavators including swing zone management and underground utility protection.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Machine and work authorization

    For operation of the identified hydraulic excavator and approved attachment. This does not replace an excavation protective-system plan, demolition method, utility permit or suspended-load lifting plan.

    Define the entire movement area: Include the tracks or wheels, counterweight, boom, attachment, load and possible falling material. An exclusion area based only on the bucket position leaves other crush and struck-by hazards uncontrolled.

  2. Inspect the machine and coupler

    Use the manufacturer checklist for structure, undercarriage, hydraulics, controls, restraints, visibility aids and safety functions. Report defects and remove unsafe equipment from service.

    Positive attachment security: Confirm attachment compatibility and the required locking arrangement. Complete the coupler engagement check prescribed for that device with people clear. Install any required retaining pin and do not rely on an indicator alone where a physical or operational check is specified. Do not let anyone stand below a bucket or attachment during connection or checking. Follow the approved attachment-change procedure and reassess hydraulic, guarding and cab-protection requirements for a different tool.

  3. Position, services and support

    Confirm ground bearing capacity and the approved distance from excavation edges, structures and voids. A one-metre-per-metre-depth formula is not a universal safe setback.

    Apply the correct service-clearance plan: Establish underground service locations and restrictions before digging, using the utility owner and local requirements. Determine overhead electrical clearances for the actual voltage and jurisdiction. Stop for unknown services or a location outside the approved work envelope. Use the support and configuration prescribed for this model and task. Improvised mats or stabilizer placement do not establish adequate ground capacity. Reassess after rain, settlement or changes to the excavation or nearby loads.

  4. Separate people and control movement

    Provide barriers and controlled pedestrian access, including the counterweight and rear swing area. Position any marshaller where the operator can see them and where the machine cannot trap them.

    Stop before allowing an approach: Keep workers outside the operating arc and away from raised attachments. Establish communication and apply the prescribed control-isolation or shutdown method before authorized approach. Do not leave controls active merely because the engine is idling. Operate smoothly from the designated seat with the required restraint. Do not swing loads over people or use the boom for unapproved side pulling. Confirm the travel direction relative to the upper structure before moving; cab orientation can reverse the apparent direction of travel controls.

  5. Material handling and special operations

    Use the actual lift chart and approved lifting points for any authorized suspended-load task. Include the attachment and lifting accessories as required by the chart and configuration.

    Digging capacity is not lifting capacity: Do not infer a permissible load from bucket volume or digging force. Confirm landing support, load security and the clear movement path. Additional inspections, safety devices and qualifications may apply to lifting under the local rules. Demolition, breakers, shears and other specialist attachments need their own approved task method and protection. Stop for ground movement, unexpected resistance, hydraulic damage or loss of visibility and have the cause assessed before restart.

  6. Park, secure and record

    Park in the designated safe area and lower the attachment to a stable position. Apply the model shutdown, control-isolation, braking and key-control instructions. Do not assume tracks and road wheels use identical parking measures.

Reference guidance: HSE Excavators overview, quick hitches and control-isolation bulletin; NIOSH quick-coupler guidance (2024-102); HSE lifting-operations guidance; SANY excavator operating guidance. Complete with the actual machine manual.

Download the Full PDF Template

Get the complete Excavator Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial