Forklift Operations
This procedure covers safe operation of powered industrial trucks including counterbalance, reach and order picker forklifts.
What This Procedure Covers
- Truck-specific authorization
Complete for the identified forklift class, attachments and workplace. Reach trucks, order pickers, stand-up trucks and pedestrian trucks need their specific operating and emergency instructions; do not apply sit-down instructions indiscriminately.
Training and evaluation are different: Where US OSHA 1910.178 applies, operator performance evaluation is required at least every three years; refresher training is triggered by unsafe operation, incidents or relevant changes, not merely a three-year calendar. Apply the rules for the actual jurisdiction and truck.
- Pre-use inspection and defect control
Perform the specified visual and operational checks before use and at the required shift intervals. Use the truck checklist and record defects; remove equipment with a safety defect from service.
Power source and operating environment: Check the fuel or battery system as instructed. Use the separate approved charging or refuelling procedure. Assess ventilation and exhaust exposure before operating a combustion-powered truck indoors; a running engine is not made safe by an open doorway alone.
- Load and route assessment
Use the capacity plate for the actual truck, attachment, load centre and lift height. Do not use the advertised maximum capacity for every load or add improvised counterweights.
Prepare a controlled route: Confirm floor and ramp capacity, surface condition, turning space and overhead clearance for the truck and load. Separate pedestrians using the site traffic plan. Establish signals and a safe spotter position where needed; stop if communication or visibility is lost. Keep unauthorized riders off the truck and never carry people on forks or pallets. Personnel lifting is outside this procedure and requires an expressly approved system and separate authorization.
- Pick up, travel and set down
Approach squarely, position forks or the attachment for the load, engage sufficiently and verify stability before moving. Keep people clear of the mast, pinch points and raised load.
Travel according to the truck and conditions: Carry the load low enough for stability and high enough to clear the route, using the model travel position. Look in the direction of movement and slow for turns and blind areas. If forward vision is blocked, use the approved direction or assistance; never reverse blindly or ignore grade-specific requirements. For a loaded conventional counterbalanced truck, keep the load upgrade on a ramp and do not turn on the grade. Other truck types can have different instructions. Verify the actual truck guidance and permitted slope before use. Raise and lower only with the truck positioned for the task. Check the rack or landing capacity and clearance, place the load securely and withdraw without dragging it. Do not travel with an elevated load except where the equipment and operation are specifically designed for it.
- Docks, parking and emergency preparation
Use the site dock-release procedure before entering a trailer. Verify restraint arrangements, trailer support and floor condition, and a secured dockboard rated for the truck and load.
Park safely: Use the designated area, fully lower the load-engaging means, neutralize controls, apply the parking brake and shut down as instructed. Keep exits and emergency equipment clear and prevent unauthorized operation. Apply any additional wheel-blocking requirements for the location.
Tip-over response must match the truck: For a sit-down counterbalanced truck, use the seat restraint and follow its stay-in-seat/brace instructions; do not jump. Do not transfer that response to a rear-entry stand-up truck, which has different escape instructions. Train and record the manufacturer response for this truck before operation.
- Local additions and follow-up
Record the selected truck-specific arrangements and attach the traffic plan, inspection checklist and load information. Reassess when the truck, attachment, workplace or task changes.
Reference guidance: OSHA Powered Industrial Trucks eTool (load handling, travel, ramps); OSHA operator-training requirements; CCOHS Forklift Trucks - Daily Checks and Professional Operator. Complete with the actual truck manual and applicable requirements.
Download the Full PDF Template
Get the complete Forklift Operations document as a fillable PDF, part of the Safe Work Procedures Template Pack.
Get This SWP + 4 More Free
Choose from 112 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsWant Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial