0
Heavy Equipment

Skid Steer Loader Operation

Skid steer loader operation with entrapment prevention, attachment change and visibility management.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Machine, attachment and task

    For seated-operator skid-steer and compact track loaders with approved attachments. Stand-on compact utility loaders and specialized attachment work need their own operating instructions and task controls.

    Plan around restricted visibility and moving arms: Identify the loader travel area, attachment reach and material discharge zone. The operator compartment does not protect someone who reaches outside it or bypasses an interlock. No riders or people in the bucket are permitted.

  2. Inspect and verify attachment security

    Use the model inspection checklist before operation. Check tires or tracks, hydraulic leaks, lift arms, pivots, protective structures and the attachment mounting system.

    Attachments change the hazards: Confirm compatibility, hydraulic flow and pressure, guarding and any cab protection required by the attachment. Check positive coupler engagement using the manufacturer method. An attachment that fits the coupler is not automatically approved for the loader or task. Remove the machine from service for failed restraints, interlocks or unsafe defects. Never bypass a system to continue work. Use the approved maintenance procedure for repairs and pressure-related faults.

  3. Work zone, ground and route

    Separate pedestrians using barriers and controlled access where possible. Set the exclusion area for the actual attachment, blind spots and thrown-material hazards; ten feet is not a universal safe distance.

    Choose a route the machine can handle: Assess soft ground, ruts, ramps and drop-offs and follow model limits. Travel straight up or down permitted slopes with the heavy end uphill, accounting for the attachment and load. Avoid cross-slope travel; do not treat a generic ten-degree limit as permission to traverse. Coordinate with nearby vehicles and workers before reversing or dumping. Use a safe spotter arrangement where visibility requires it; stop if the spotter disappears or communication fails. Cameras and alarms do not replace a clear travel path.

  4. Enter, operate and handle material

    For normal entry and exit, lower the attachment to the ground and use the designated steps and handholds. Some models have front entry over the lowered attachment and others have side entry; follow the actual design.

    Operate from the designated seat only: Secure the seat belt and required bar or door before operation. Keep head, arms and legs inside the compartment. Do not start or operate controls from outside the cab or reach out to clear debris while the machine can move. Carry material low in the specified travel position and use smooth movements. Raise only for the planned loading or placement task with people clear. Prevent material rolling back into the cab and keep the attachment away from occupied vehicles or unprotected workers.

  5. Leave the seat and manage faults

    Park on suitable ground, lower the attachment, apply the brake, stop the engine and follow the manual control and restraint-release sequence before exit. Do not leave a running machine unattended.

    Raised arms are a crushing hazard: Do not enter the space beneath raised arms or rely on hydraulics to hold them. Work that requires raised arms needs the manufacturer-approved support device installed by its prescribed method and the applicable maintenance energy-control procedure. A restraint interlock is not a mechanical support. Stop for attachment movement, lost restraint function, instability or hydraulic damage. Keep people clear and arrange qualified assessment. Do not search for a pressurized hydraulic leak with your hand.

  6. Local records and follow-up

    Reassess when changing attachments, materials or ground conditions. Attach the loader and attachment instructions and the site traffic arrangements.

Reference guidance: NIOSH Preventing Injuries and Deaths from Skid-Steer Loaders (2011-128); CCOHS Landscaping - Loaders; WorkSafe Victoria skid-steer risk guidance. Complete with the actual loader and attachment manuals.

Download the Full PDF Template

Get the complete Skid Steer Loader Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial