Aerial Work Platform Operations
This procedure covers safe operation of boom lifts, scissor lifts and other aerial work platforms (AWPs).
What This Procedure Covers
- Select the platform and authorize the task
Complete for the actual boom-supported, scissor or other mobile elevating work platform. The machine type determines controls, permitted movement and fall-protection arrangements.
Match equipment to the work: Select capacity, reach, ground capability and environmental rating for the task. Do not use an indoor-only machine outdoors or assume that training on one category establishes competence on every platform. Record applicable retraining or evaluation requirements.
- Inspect and function-test before use
Complete the model-specific pre-use inspection and function tests in a safe test area. These are separate checks; a visual inspection alone does not demonstrate that controls work.
Use the prescribed test sequence: Follow the manual for alarms, tilt or load functions and emergency lowering. Do not bypass an interlock or improvise a test that exposes a person to movement. Tag a failed machine out of service and repeat the required inspection and tests after repair.
- Ground, surroundings and work-zone setup
Assess support capacity, slopes, holes, covers, edges, overhead obstructions and traffic. Check the whole intended travel and elevated work envelope.
Control weather and nearby activity: Apply the machine wind and weather limits and stop when conditions exceed them. Large panels or materials can increase wind loading. Establish barriers or traffic controls to protect people below and prevent vehicles striking the machine. Maintain the required electrical approach distances for voltage, equipment and local rules. Do not treat every platform as insulated or use one distance for every situation. Keep the boom and materials out of the restricted zone.
- Fall protection and work in the platform
Close the entry gate, stand on the platform floor and keep the guardrail system intact. Do not climb rails or use ladders, boxes or planks to gain reach.
Boom and scissor platforms differ: Boom-supported platforms require the prescribed personal fall-protection system connected to approved platform anchors. For scissor lifts, guardrails are the primary protection; any personal system must follow applicable rules, the manufacturer and site assessment. Do not attach to an arbitrary rail or adjacent structure. Stay within the rated capacity and permitted platform extension loading. Keep the work within comfortable reach. Reposition the machine instead of leaning out or using the platform to push, pull or support an unapproved external load.
- Movement and emergency readiness
Use controlled movements and watch for trapping against beams, ceilings and structures. Stop if the operator cannot maintain a clear view or the agreed communication with ground support.
Movement follows the actual machine limits: Only drive elevated where the machine is designed for it and the manual and site conditions permit it. Otherwise lower or stow before travel. Do not override tilt, load or drive interlocks to complete a task. Establish an emergency and recovery plan before elevation, including trained people who can use the specified ground controls. A failed or trapped platform may need specialist assistance; do not improvise a climb-out or use another machine for an unplanned transfer. Stop for a malfunction, entrapment risk or electrical contact concern and follow the site emergency plan. Keep others clear until the hazard has been assessed and the equipment released.
- Shutdown and local records
Lower or stow using the manual, park in the designated area, secure the machine and report defects. Use the separate approved charging, refuelling or transport procedure as applicable.
Reference guidance: OSHA Aerial Lifts and Scissor Lifts eTools; Genie Inspections and Function Tests and daily MEWP test guidance; JLG pre-operation guidance. Complete with the actual machine manual and local requirements.
Download the Full PDF Template
Get the complete Aerial Work Platform Operations document as a fillable PDF, part of the Safe Work Procedures Template Pack.
Get This SWP + 4 More Free
Choose from 112 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsWant Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial