Dump Truck Operation
Dump truck operation including raised-box power line hazards, tip-over during dumping and haul road safety.
What This Procedure Covers
- Vehicle and load authorization
Complete for the actual on-road or off-road truck, body and tipping mechanism. Articulated vehicles, tip trailers and specialized spreading operations need their specific operating limits and site method.
Agree the delivery and tipping arrangements: Confirm site access, the approved discharge point and communication with the receiving crew before arrival. Identify the load characteristics, including material that may stick, bridge or shift. Do not assume a generic truck procedure covers every body type.
- Pre-trip and body inspection
Complete the applicable vehicle inspection and manufacturer checks. Inspect the body, hoist, pivots, subframe, tailgate and latches in addition to road and driving equipment.
Test only in a safe configuration: Follow the manual for indicator and hoist tests, with adequate overhead clearance and people outside the body movement area. Do not raise a body merely to test a warning lamp in an unassessed location.
- Loading and haul route
Agree the driver location during loading with the site and loading-machine operator. Remain in a protected cab only where that is the approved arrangement; otherwise use the designated safe waiting area.
Keep the load and route controlled: Load evenly within the vehicle and body ratings. Secure tailgates and use the specified covering or containment for travel. Check loaded height, bridges, overhead services, turning space and route restrictions. Use the seat restraint and travel at a speed appropriate for conditions. Stop if the reversing area is not clear or communication is lost. Keep spotters visible and out of the vehicle path and pinch zones. Cameras and alarms support the system but do not establish that the area is empty.
- Verify the tipping position
Use a firm, stable, level location that supports the whole vehicle and load throughout tipping. Assess edges, buried voids, previous tipped material and changing ground conditions.
Do not substitute a downhill rule: If the location does not meet the vehicle instructions and tipping plan, stop and obtain a suitable location or approved alternative. A generic instruction to dump downhill on an unavoidable slope is not an adequate stability control. Confirm the tailgate is configured for the intended discharge and can withstand the load where retained. Keep personnel out of the discharge and body-swing area. Do not use an unapproved tailgate opening as a controlled chute.
- Tip, monitor and handle a stuck load
Follow the body and vehicle instructions for brakes, transmission and hoist controls. Raise smoothly while monitoring stability, body alignment and material discharge.
Stop for sticking or instability: Do not drive or jerk the truck to shake loose a stuck load. Stop and follow the approved safe recovery method, lowering the body only where the manufacturer procedure and conditions permit. Keep people clear and obtain assistance rather than climbing into or onto a raised body. Confirm the body is fully down and the tailgate secured before normal travel. Do not rely solely on a lamp if the body position is uncertain. Any specialized spreading movement needs a separate manufacturer-approved method. For electrical-contact concerns, keep people clear and activate the site emergency procedure and utility response. Do not approach or touch the vehicle until the electrical hazard has been made safe.
- Parking, maintenance and records
Park and secure according to the manual and site conditions. Never work beneath a raised body without the approved positive support and applicable maintenance energy controls; hydraulics alone are not support.
Reference guidance: NIOSH Preventing Dump Truck-related Injuries and Deaths (2023-137); HSE Tipping and Loading guidance; WorkSafe New Zealand tipping-load guidance. Complete with the vehicle/body manuals and local requirements.
Download the Full PDF Template
Get the complete Dump Truck Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.
Get This SWP + 4 More Free
Choose from 112 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsWant Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial