Loading Dock Safety
Loading dock safety covering trailer securement, dock levelers and pedestrian protection.
What This Procedure Covers
- Scope, roles and site approval
Complete and approve this procedure for the actual dock, vehicles, restraints and loading equipment. It coordinates dock operations; it does not qualify a forklift operator or replace equipment instructions.
Before accepting a vehicle: Confirm the bay is suitable for the vehicle and load. Brief drivers in a form they understand: assigned bay, movement instructions, pedestrian route, safe waiting area and who authorizes departure. Keep unauthorized people out of the loading zone.
- Arrival, restraint and support
Follow the approved arrival sequence. No one enters the trailer or crosses a dockboard until the responsible person has verified the required movement-prevention and support arrangements.
Control unintended movement: Confirm the required parking brakes, wheel chocks and/or compatible restraint system under the applicable rules and approved equipment instructions. Verify engagement and status; a signal light alone is not proof that a restraint fits or functions. A failed or incompatible system requires a separately approved alternative before loading.
Check trailer support: For an uncoupled trailer, assess whether additional supports are needed to prevent upending or collapse. Landing gear and supplementary support are not interchangeable terms. Use the specified support arrangement and sound bearing surface; do not assume the landing gear alone is adequate.
- Dockboard, trailer and loading readiness
The assigned person verifies readiness for the intended equipment and load. Keep people clear of door movement and potential falling cargo while doors are opened under the approved method.
Inspect the transition and interior: Check the trailer floor, lighting, clearances, load stability and access. Inspect the dockboard or leveler for defects, proper positioning and protection against displacement. Confirm its marked capacity covers the maximum intended load, including the handling equipment. Do not enter an unsafe trailer or cross a defective transition. An unloaded bay still needs appropriate edge protection. Paint, a warning chain or a bumper must not be assumed to provide the required fall protection. Keep the planned pedestrian and escape routes clear.
- Loading, stop conditions and release
Only authorized operators use the handling equipment. Apply its operating procedure, the approved loading sequence and the vehicle/load limits. Keep uninvolved people out of the operating area.
Stop and secure the area: Stop for trailer movement, restraint failure, unstable cargo, damaged floors, shifted dockboards, loss of lighting or communication, or people entering the danger zone. Keep others clear and obtain assessment. Do not reach into a gap or attempt an improvised adjustment while equipment or people remain exposed.
Authorize departure positively: Confirm all people and handling equipment are clear, cargo is secured, and doors and dock equipment are in their required departure positions. The designated person then releases the movement-prevention arrangements in the approved sequence and gives the driver an unambiguous departure authorization. Reconcile conflicting signals before any movement.
- Verification, exceptions and improvement
Brief this completed procedure and verify practical understanding before assignment. Review after equipment changes, incidents or identified deficiencies. Retain the supporting instructions and assessment with the controlled procedure.
Reference guidance: OSHA 1910.26 Dockboards; OSHA Powered Industrial Trucks / Load Handling and Loading Docks; HSE Loading and unloading. Confirm the applicable local requirements and equipment instructions before approval.
Download the Full PDF Template
Get the complete Loading Dock Safety document as a fillable PDF, part of the Safe Work Procedures Template Pack.
Get This SWP + 4 More Free
Choose from 112 procedures. No credit card, no commitment.
Pick Your 5 Free SWPsWant Digital Sign-Off for Your SWPs?
Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.
Start Your Free Trial