0
Heavy Equipment

Motor Grader Operation

Motor grader operation with traffic control, articulation safety and road grading procedures.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Machine, operator and work limits

    For the identified motor grader and approved grading task. Public-road work requires an authorized traffic-control arrangement. Ditching, snow removal and other specialist operations need task-specific controls.

    Plan for the full movement envelope: Include blade projection, rear-frame swing, articulation and turning clearance. The wheel path alone does not define the space needed. Identify pedestrians, passing vehicles, roadside structures and services before selecting the operating configuration.

  2. Inspect and test

    Use the manufacturer checklist for tires, wheel fasteners, frame, moldboard, circle, articulation, attachments, hydraulics, access steps and visibility. Have defects assessed before release for work.

    Know the fitted safeguards: Confirm the safety systems actually installed on this model, including any operator-presence or secondary-steering system. Follow the prescribed checks and do not bypass safeguards. Keep out of articulation pinch points; access for maintenance requires the approved securing method. Use designated access points and three points of contact. Keep footholds and windows clean and wear the seat belt while operating. Check the work area is clear before startup and movement.

  3. Ground, utilities and traffic

    Review ground support, crossfall, edges and surface condition against the actual machine limits and task configuration. A road design gradient is not proof of safe machine operation.

    Separate the work from road users: Implement the approved traffic plan before entering the work zone. Establish access, signs, barriers, traffic-control personnel and protection vehicles where required. A beacon or a few cones alone do not establish adequate separation from moving traffic. Confirm safe entry and exit, reversing arrangements and visibility through dust or darkness. Stop and restore controls if traffic enters the work area or required protection is displaced.

  4. Configure and grade

    Select blade angle, pitch, side shift and other settings using the machine manual and approved task method. Keep the blade and attachments clear of people, obstacles, tires and other machine parts throughout their movement.

    Control speed and articulation: Use a speed suited to material, visibility and surface conditions. Avoid abrupt steering or articulation and follow the model restrictions for road travel. Automatic articulation or grade assistance does not remove the need to monitor clearance and machine behavior. Stop for unexpected pulling, bouncing, loss of traction or changing ground conditions. Reassess before continuing. Do not apply a universal blade-toe or heel setting as a substitute for the correct ditching method and operator training.

  5. Reposition and allow safe approach

    Check the route before reversing or turning. Arrange a competent marshaller where the traffic plan requires one, positioned outside the machine envelope and visible to the operator.

    Stop movement and secure the machine and implements before an authorized person approaches. Keep people clear of the articulation joint and blade movement area. Do not use the blade or steps to carry passengers.

    Use the correct travel configuration: Before travel between work areas, place blade, scarifier and other attachments in the manufacturer travel position. Confirm required locks, articulation settings, route dimensions and road permissions. Do not assume every model uses the same transport lock arrangement.

  6. Park, secure and record

    Park in a designated safe area clear of traffic where possible. Lower implements, apply the parking brake and complete the prescribed shutdown and control-securing sequence. Maintain any required roadway protection until the machine is safely removed.

Reference guidance: Caterpillar Motor Grader Safety Features and articulation guidance; CCOHS Working Safely Around Heavy Equipment. Use the actual machine manual and applicable road-authority requirements for local approval.

Download the Full PDF Template

Get the complete Motor Grader Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial