0
Power Tools

Table Saw Operation

Table saw operation with riving knife, push stick use and kickback prevention.

Rev 02 Updated Apr 19, 2026

What This Procedure Covers

  1. Scope and operator authorization

    Complete for the actual table saw and routine through-cutting tasks. Dadoes, non-through cuts, special jigs and other configurations need a separately assessed and approved method; this template does not authorize guard removal.

    Check that the stock can be controlled: Inspect for foreign objects, loose defects and unsuitable shape. Assess warped, short, narrow or large stock before selecting supports and feeding aids. Use another method when the work cannot be safely supported and guided through the planned cut.

  2. Inspect guards, guides and controls

    Disconnect the energy source using the machine instructions before setup or adjustment that exposes the blade. Check the blade, insert, guards, riving knife or spreader, required anti-kickback devices, fence and controls.

    Restore the intended safeguards: Use the manufacturer-approved guarding configuration for the cut. Check clearance through the required height and bevel range. A push stick or electronic injury-mitigation feature does not replace the required guard and kickback controls. Keep a defective or incomplete machine out of service. Confirm operators can reach the stop control without reaching across the blade. Maintain suitable lighting, footing and space for the complete workpiece travel.

  3. Plan feeding, support and hand clearance

    Set up adequate infeed, side and outfeed support without obstructing travel. Keep bystanders out of the potential kickback path. Select appropriate eye, hearing and respiratory controls for the exposure.

    Avoid trapping the stock: Do not cut freehand. Use the correct rip fence, miter gauge or approved sled for the task. Do not trap a crosscut piece between the blade and rip fence; any measuring stop must be arranged under an approved method so the work is free of it before blade contact. Have feeding aids ready before starting. A helper supports the exiting stock without pulling, twisting or steering it. Do not depend on an improvised hand position to complete a narrow cut.

  4. Perform the cut and stop safely

    Use the approved feed direction, guide and body position. Keep the stock supported against the intended guide and feed steadily. Do not force a binding workpiece or reach over or behind a moving blade.

    Maintain control through completion: Use the selected push device before hands approach the danger area. Keep pressure and support as the method requires without pushing sideways into the blade. Let the blade stop before retrieving scraps, changing the setup or clearing an obstruction.

    Resolve binding or unexpected behaviour: Stop the machine safely, wait for movement to cease and disconnect the energy source before resolving a trapped piece or exposed adjustment. Do not pull stock backward through a running blade. Reassess the guide, blade, stock and support before restarting.

  5. Shutdown, cleanup and records

    Wait for the blade to stop before leaving. Follow the approved shutdown and storage arrangement, including blade position. Use the prescribed dust-cleaning method and keep records of defects and repairs.

Reference guidance: CCOHS Table Saws and Push Sticks; OSHA Machine Guarding / Table Saws and Woodworking / Kickbacks. Complete with the actual equipment manual, guarding assessment and local requirements before approval.

Download the Full PDF Template

Get the complete Table Saw Operation document as a fillable PDF, part of the Safe Work Procedures Template Pack.

Get Template Pack

Get This SWP + 4 More Free

Choose from 112 procedures. No credit card, no commitment.

Pick Your 5 Free SWPs

Want Digital Sign-Off for Your SWPs?

Make Safety Easy lets your crew acknowledge procedures on any device. Track who read what, when. No more lost paper forms.

Start Your Free Trial